Category Archives: Home Services

Reasons You Should Get Your Electrical Outlets Replaced

How often have you actually paid attention to your electrical outlets at home? While it’s true that electrical outlets are incredibly essential in our homes, most of the time, they are also one of the most commonly neglected components in the house. Many homeowners won’t even consider having them replaced unless if there are obvious and dangerous issues with a particular outlet.

However, it is important to note that faulty outlets are among the leading causes of electrical fires. That said, it is crucial to have your outlets inspected frequently to ensure that they are in good working order and have no hidden issues that may result in dangerous electrical mishaps.

It’s About Time: When to Update Your Electrical Outlets

Knowing when to have your home’s electrical outlets replaced may not always be easy. But, here’s what you should know about.

Aging Outlets

Aside from being an eyesore, an aging outlet is susceptible to electrical issues. Over time, wires inside degrade making them prone to power arcing and cause electrical fires.

Outdated Outlets

Outdated outlets may be putting your home at risk. If you are still using two-pronged outlets or your receptacles are no longer able to keep up with your current demand for electricity, it may be high time for you to consider updating your electrical outlets.

Wear and Tear

As with other components we frequently use in the house, receptacles are subject to wear and tear, which can result in poor or loose connections. In turn, this can cause excessive heat buildup, which has the potential to ignite an electrical fire. So, even if you don’t see apparent problems, you should see to it that you check your outlets and wirings at least once a year to protect your family and home.

Changing from Series to Parallel Circuit

Many homeowners will opt to have their electrical outlets replaced to change from series to parallel circuit. In a series circuit, whenever one outlet has an issue, all the other outlets in the series are affected. Having your outlets placed in a parallel circuit is an excellent way to make sure that you don’t have to deal with having all outlets going bad all at once.

Appliances Upgrades

Are you planning to upgrade your appliances or add some major appliances in your home? Then, it may be time to upgrade or have new electrical outlets installed. This is to make certain that your outlet is able to keep up with the power demand of the new appliance, aside from the fact that some major appliances require dedicated outlets to function properly.

Some of the major appliances which may require you to install new outlets include microwaves, bathtubs, portable air conditioners, washers, and dryers.

Signs You Should Replace Your Electrical Outlets

Now, let’s talk about the most common problems that could indicate that an electrical outlet replacement is in order.

Sparking Outlets

If you are noticing a spark in an outlet, you will want to give it immediate attention. Sparking outlets can cause power arcing which can escalate into an electrical fire.

Outlets That Feel Hot to Touch

Just like a sparking outlet, outlets that feel abnormally hot to touch can be a sign of a serious problem. You should contact a qualified electrician immediately to address issues with hot outlets and avoid electrical hazards.

Cracked or Worn Out Outlet Covers

More than just a cosmetic issue, cracked outlet covers can easily turn into something more serious. Cracked covers allow debris and dust to get into the wiring system and may cause damage.

Flickering Lights

If the light plugged into a receptacle flickers, this could be a sign that your outlet can no longer keep up with the power demand, and it’s time to consider for an upgrade. Be sure to contact a qualified electrician to inspect the issue and see if that’s the case. 

Common Wiring Mistake On Switches and Outlets

Watch the video below to learn about the common wiring mistake on switches and outlets that you should avoid.

Choosing the Right Electrical Contractors – 7 Questions to Ask

Finding the right electrical contractor can be difficult. However, ensuring you hire only the qualified ones is necessary not just to get your money’s worth, but for you and your family’s safety since electrical wiring mishaps are one of the leading causes of residential fires.

electrical contractors

I contacted a couple of electricians where I live to get some professional advice about what questions I should be asking when hiring an electrical contractor, Steve was king enough to answer my question:

I worked on many electrical contracting projects and consider myself a residential electrician columbus ohio can trust, as such here are 7 tips to follow before you sign an agreement with your prospective electrical contractor, here are seven essential questions to ask:

  • Are you bonded and insured?

Generally, a licensed and bonded electrical contractor is expected to deliver the best level of services and with proper observance to necessary codes and building requirements.

  • How much experience do you have working on this type of project or repair?

Investing in hiring reliable and expert contractors is one way to make sure the job is done right the first time, and unnecessary repairs or reworks are avoided.

  • Can you provide references?

Obtaining references prior to hiring an electrical contractor is essential for you to get an idea of the contractor’s workmanship and work attitude.

  • How long will it take for the project to be completed?

Experienced electrical contractors know the ins and outs as well as the problems that will likely come out in a specific electrical job, which are factors in determining the estimated project completion.

  • What is included in the estimate?

It is vital to discuss the details in the pricing structure so you will know what to expect and how much you should allocate in your budget for the project.

  • Who will obtain the necessary permits?

It is standard for the electrical contractors to secure the required permits for the homeowners. These permits are critical for the protection of the homeowner and ensuring quality of work.

  • Do you have a warranty on your services?

Warranties serve as a guarantee for the quality of work, and it’s a must for the homeowner to know how well a licensed electrician stands behind his electrical work.

Electrical Safety: Things You Need to Know About Electrical Safety Gloves

When it comes to electricity, it is always best to be safe than sorry. That’s why, aside from exercising caution when dealing with electricity, we need to use every appropriate protective equipment to reduce risks from electrical hazards. One such essential items of PPE or Personal Protective Equipment are rubber insulated gloves. Insulated gloves can be your first line of defense to keep you safe and prevent electric shocks.

OSHA or Occupational Safety and Health Administration mandates the use of rubber insulated gloves for workers who will have to deal with high and low voltage applications or with energized circuits. Here are some vital things you should know about electrical safety gloves for your protection:

Types of Electrical Gloves

There are two types of electrical gloves, Type I which are not resistant to ozone, are typically made from are natural rubber, while Type II rubber gloves are resistant to ozone and are usually made from synthetic rubber.

Leather Protectors

In most cases, rubber insulated gloves must be worn under leather protector to provide protection from abrasions, cuts, and punctures.

OSHA Regulations

When purchasing electrical gloves, it’s crucial to ensure the gloves you choose comply with OSHA regulations. Rubber insulated gloves must also be subjected to regular testing before they are used. Manufacturers are required to put date stamps indicating the date the gloves have undergone initial testing.

Rubber Insulated Glove Inspection

Just like other PPEs, rubber gloves must be maintained in a safe and reliable condition. Electrical gloves must undergo regular inspections for swelling, tears, cuts, holes, and other damages before each use. In addition to performing inspections to check for defects, rubber gloves must also be air tested to see to it that they can provide the best hand protection against electrical shocks.

Watch the video below to learn about the proper guidelines and procedures during rubber glove inspection.

Electrical Safety Testing Devices – Knowing About Their Uses and Benefits

Electrical devices have become invaluable tools in our daily living today, allowing us to do our routine tasks effectively – and not to mention making our lives much easier. But, at the same time, usage of these appliances come with various risks owing to the fact that they are still subject to failures and mishaps. That said, it is crucial to examine these electrical devices with the help of applicable electrical safety testers.

Electrical Testing Devices and Their Uses

Professional electricians make use of a range of electrical testers for checking a variety of electrical functions and devices in both residential and commercial wiring. These testers make it possible to check the efficiency, durability, and working condition of various electrical appliances.

Some of the common uses of these electrical testers include the following:

  • To test for the presence of live voltage
  • To check the voltage levels of the AC and DC circuits
  • To test for amperage
  • To test for continuity of electricity flow
  • To determine short circuits and open circuits
  • To identify polarity

Electrical testing tools aren’t just necessary and useful tools for electricians, but for DIY homeowners as well, so they can perform their own tests for safety and maintenance checks, ultimately cutting down hazards and ensuring the smooth running of electrical devices.

Some Types of Electrical Testers

Most electrical testing devices today are automated. They are programmed for easy testing and come with easy-to-follow manuals. Here are some types of electrical testers that can come in handy when doing electrical works:

Continuity Testers

Continuity testers come with a probe at one end and either another probe in the end or a cord with an alligator chip. They are powered by batteries and are great for checking if an electrical path between two points is working properly.

Continuity testers must only be used with the power source to the circuit turned off. To use it, unplug the device and disassemble it to get at the component you want to be tested. Fasten the tester’s clip to one wire or connection of the device, and touch the tester’s probe to the other wire or connection. If the device is receiving electricity and transmitting it, the tester should either light up or buzz indicating that the circuit is continuous. Otherwise, the device is faulty.


As the name implies, a multimeter is a versatile electrical tester. A typical multimeter can provide readings of AC and DC voltage, capacitance, continuity, frequency, and resistance. Multimeters have a box-like body with an analog or digital display, a dial to set the test function, and two metal probes.

Neon Voltage Testers

Also known as neon circuit testers, a neon voltage tester is a straightforward and easy to use tool. It is consist of a small body with neon light and two insulated leads with a metal probe on both ends and tells you whether or not there is voltage running in a circuit.

Non-Contact Voltage Testers

Non-contact voltage testers are also known as inductance testers and are the easiest, and probably the safest electrical tester tool to use. This device allows you to test for voltage without the need to touch any parts or wires. To use the device, simply stick the tester’s tip into an outlet and the tester typically lights up or buzzes if a voltage is present.

Plug-In Circuit Analyzers

Inexpensive and easy to use, a plug-in circuit analyzer is useful in verifying proper wiring and GFCI or grounded outlet operation. The tool provides different light patterns to indicate a correctly wired receptacle, an open circuit, a reverse-wired receptacle, and the presence or absence of a ground connection. The plug-in circuit analyzer does not need batteries to work. All you need to do is plug the tester into the outlet to test.

Solenoid Voltage Testers

A solenoid voltage tester is a multi-function tester which can measure both AC and DC voltage ranging from 100 to 600 volts. Unlike multimeters, they are easier to use and don’t require batteries to work though they are not entirely as accurate as the latter when it comes to providing numerical measurement of the amount of voltage present. 

Understanding Electrical Safety Testing Devices

Learning about the electrical safety testing devices, understanding their functions, and knowing how to use them properly will significantly add to your expertise and safety when performing electrical works.

Check out the video below for a detailed guide on how to use a multimeter, a multi-function electrical testing tool.

Discover Ways to Save on Electrical Repair Services

Anything that involves electricity should not be taken lightly. And, this is particularly true when it comes to electric repair services. You cannot just hire anyone who claims to know the job. Instead, you should always opt for a qualified and reliable professional electrician who will ensure the job gets done right the first time.

Do not be tempted to settle with an amateur just to cut down costs. Any electrical mistakes can end up costing you more on unnecessary repairs or rewiring, and may even put you and your family members’ lives in danger.

That said, there are still different ways one can save money in times electrical repair services are needed. We consulted with Atlanta Electrician company and came up with some smart tips for saving money while carrying out electrical repair services at home.

Buying the Electrical Parts or Materials Yourself

It’s a well-known fact that electrical contractors often place a significant mark up on the prices of electrical parts they are using. To save money, you will want to purchase these electrical parts yourself and contract the electrical repair service only. This way, you can compare prices and even choose better quality materials to save more in the long run.

Columbus Ohio Electrician
1550 Old Henderson Rd, Suite 45
Columbus, OH 43220
(614) 340-2458

Take Advantage of Hiring Local Electricians Near You

One should note that travel expenses, including fuel costs and the time spent, is another factor in the overall price when you contract electrical repair services. To avoid all these, it’s a good idea to opt for experts near where you are.

Have Multiple Repairs Done In One Visit

Before making an appointment, go ahead and determine how the electrician can help you best during the visit. You can save more when you bundle multiple jobs in one visit. Perhaps, you needed an electrician to handle a malfunctioning lighting fixture but realize that you’ll also be needing a new outlet installed in another room. You can have that taken care of too, and thank yourself a couple of months later.

Prepare the Work Area Ahead of Time

Professional electricians typically charge their services per hour. To avoid paying extra, you can prepare and clear the area prior to the appointment. For instance, you can move the furniture around the outlets or fixtures that could get in the way during the repair.

Quality Should Be Your Top Priority

Even when you want to save money while carrying out the electrical repair, quality should remain as your foremost priority. This could mean you need to find a qualified and experienced electrician even if you have to pay a slightly higher price. Remember that choosing quality service saves you from the hassles of costly repairs over the same issue. In the end, when you look at the bigger picture, a job that’s done well is cheaper in the long run.

The bottom line is, electrical repairs don’t have to be that expensive. You can always find access to get the best quality services and still save money – and time. The trick lies in knowing just how to go about it.